Addaflex-R

Resin Bound Recycled Rubber And Aggregate Surfacing

Addaflex-R is a recycled rubber and aggregate resin bound surfacing product suitable for pedestrian projects to provide a smooth, low maintenance, flexible surface with up to 50% recycled rubber content.

Suitable for pathways and tree pits, depending on ...

Addaflex-R is a recycled rubber and aggregate resin bound surfacing product suitable for pedestrian projects to provide a smooth, low maintenance, flexible surface with up to 50% recycled rubber content.

Suitable for pathways and tree pits, depending on your requirements, Addaflex-R can be applied directly onto most suitable surfaces and gradients including asphalt, concrete and compacted M.O.T. Type 3.

Addaflex-R is porous, allowing water to permeate/percolate through the surface and beyond when a suitable base build-up configured for SuDS (Sustainable Urban Drainage Systems) has been installed.

Available in 50/50 or 75/25 aggregate to recycled rubber ratios in a select range of colours to suit your project requirements.

Recycled tyre content per sqm

1 sqm of Addaflex-R 75 at 30mm depth contains recycled rubber from an estimated 16 tyres

1 sqm of Addaflex-R 50 at 30mm depth contains recycled rubber from an estimated 25 tyres

 

+ Read More

Addaflex-R

Resin Bound Recycled Rubber And Aggregate Surfacing

Addaflex-R is a recycled rubber and aggregate resin bound surfacing product suitable for pedestrian projects to provide a smooth, low maintenance, flexible surface with up to 50% recycled rubber content.

Suitable for pathways and tree pits, depending on ...

Addaflex-R is a recycled rubber and aggregate resin bound surfacing product suitable for pedestrian projects to provide a smooth, low maintenance, flexible surface with up to 50% recycled rubber content.

Suitable for pathways and tree pits, depending on your requirements, Addaflex-R can be applied directly onto most suitable surfaces and gradients including asphalt, concrete and compacted M.O.T. Type 3.

Addaflex-R is porous, allowing water to permeate/percolate through the surface and beyond when a suitable base build-up configured for SuDS (Sustainable Urban Drainage Systems) has been installed.

Available in 50/50 or 75/25 aggregate to recycled rubber ratios in a select range of colours to suit your project requirements.

Recycled tyre content per sqm

1 sqm of Addaflex-R 75 at 30mm depth contains recycled rubber from an estimated 16 tyres

1 sqm of Addaflex-R 50 at 30mm depth contains recycled rubber from an estimated 25 tyres

 

+ Read More

System features & benefits

Recycled Rubber Content

Available in 50/50 and 75/25 aggregate to recycled rubber ratios.

Lightweight

Great for balconies and roof terraces where weight is a consideration.

Durable

Expected lifespan of up to 10 years depending on surface use.

Low Maintenance

No need to sweep but can be power washed to maintain porosity.

Anti-slip

For safety, provides safety underfoot in wet and dry conditions.

Flexible

Good for tree pits in urban areas.

Porous

Excellent drainage - no surface water

This system is best for:

Footpaths

Low maintenance and comfortable underfoot.

Cycle Paths

Flexibility makes it ideal for cyclists. No loose aggregate.

Woodland Trails

Natural low maintenance walkways with flexibility underfoot.

Golf Courses

Ideal seamless option for pathways and suitable for golf shoes.

Equestrian Centres and Bridle Paths

Flexible, noise absorbing pathway surface suitable for horseshoes.

Cycle Racks and Storage Facilities

Practical, low maintenance for cycle storage and office seating areas.

Tree Pits

As a more flexible alternative to Addastone TP Tree Pit surfacing in Urban schemes.

MAKE SURE YOU GET THE RIGHT RESIN SOLUTION FOR THE JOB

Get in touch to discuss your project

System build-up and technical documents

Base Build Up Addaflex-R Rural Pathways minimum dig Cross Section
Base Build Up Addaflex-R Tree Pit

Frequently Asked Questions

What’s The Difference Between Resin Bound And Resin Bonded?

There are two different systems that use resin to fix gravel aggregates to create decorative surfacing. These are Resin Bound porous paving and Resin Bonded paving and whilst similar in name they have different properties, application methods and aesthetics. Resin bound surfacing consists of aggregate mixed with resin in specific blends using specific aggregate to resin ratios. The material is trowelled down to a smooth finish similar to a screed (with no loose stones). Depths are specified depending on aggregate size, normally 12mm, 16mm, 18mm or 24mm. Resin bonded surfacing is a scatter system which provides texture and the appearance of loose gravel. A layer of resin is applied to a suitable surface laid to falls and covered with loose aggregate. Once cured the remaining loose stones are removed. Thickness is governed by aggregate size. i.e. 1-3mm aggregate will have a nominal depth of 4mm.

Is Resin Bound Surfacing SuDS Compliant?

The Addagrip range of Resin Bound surfacing systems are porous and SuDS compliant when installed onto one of our recommended porous base build ups.

STILL HAVE QUESTIONS? CALL OUR TEAM OF SPECIALISTS NOW

We are ready to help you with your project

Need Project Support?

  • Please provide as much information about your project as you can below:
  • Request a call back

  • This field is for validation purposes and should be left unchanged.

You may recognise us from...

RHS logo
Wakehurst Logo
Love Your Garden TV Show logo
Future Build logo
RHS Hampton Court Flower Show
Scandia Hus logo
RHS Chelsea Flower Show
DIY SOS logo