Typical Addastone Specification
Addastone is a two part resin surface dressing, designed to bond natural aggregates. The finish provides an attractive, safe, hard wearing, low maintenance surface for pedestrian and vehicular areas where aggregate appearance is desired and is designed to give the appearance of natural loose aggregate.
Please go to the Addastone swatches page for a selection of available aggregates.
Addastone is a two part resin surface dressing, designed to bond natural aggregates. The finish provides an attractive, safe, hard wearing, low maintenance surface for pedestrian and vehicular areas where aggregate appearance is desired and is designed to give the appearance of natural loose aggregate.
Please go to the Addastone swatches page for a selection of available aggregates.
N.B. When specifying aggregates for resin bonding ensure specification is “washed and dried”. Do not re use aggregates or pre existing driveway gravel etc as adhesion will be compromised.
Preparation
All bituminous surfaces to be treated with Addastone resin should be sealed with Addacryl (refer to product information sheet) to prevent the resin from soaking into the capillary pores. New bituminous surfaces should be installed and compacted to current British Standard Specification.
All bituminous surfaces to be treated with Addastone resin should be sealed with Addacryl (refer to product information sheet) to prevent the resin from soaking into the capillary pores. New bituminous surfaces should be installed and compacted to current British Standard Specification.
Suggested surface course requirements
Existing bituminous surfaces should be of sound construction: Any weakness could result in a bond failure or blistering. We STRONGLY recommend that the client takes or, instructs, that core samples are taken to confirm base suitability.
Concrete and timber surfaces should be primed using
EP ADDASTONE PRIMER.
Steel surfaces should be degreased and lightly shot blasted or suitably abraded prior to application of EP ADDASOL SHEILDCOAT PRIMER (refer to product information sheets).
Existing bituminous surfaces should be of sound construction: Any weakness could result in a bond failure or blistering. We STRONGLY recommend that the client takes or, instructs, that core samples are taken to confirm base suitability.
Concrete and timber surfaces should be primed using
EP ADDASTONE PRIMER.
Steel surfaces should be degreased and lightly shot blasted or suitably abraded prior to application of EP ADDASOL SHEILDCOAT PRIMER (refer to product information sheets).
Click here to download a
pdf of this Data sheet.
pdf of this Data sheet.
Download the Long Rake Spar Brochure (supplier of aggregates suitable for resin surfacing).
Addagrip Surface Treatments UK Limited Addagrip House, Bell Lane Industrial Estate, Uckfield,East Sussex TN22 1QL, United Kingdom
Telephone: +44 (0)1825 761333 Fax: +44 (0)1825 768566
Addagrip Surface Treatments UK Ltd is a company registered in England
Registered No. 1492055 Vat No. GB 315993925
Telephone: +44 (0)1825 761333 Fax: +44 (0)1825 768566
Addagrip Surface Treatments UK Ltd is a company registered in England
Registered No. 1492055 Vat No. GB 315993925
Click here for our new
16 page brochure
16 page brochure
Datasheet
How to specify
