Addalevel SL2K is a pigmented, seamless flooring system based on a solvent-free epoxy resin compound incorporating a special filler and is primarily intended for use on new and old concrete floors.
2mm Self levelling epoxy floor finish
The latest formulation of Addalevel is a 2 part self levelling solvent free seamless flow applied epoxy system incorporating special fillers.
SL2K is easy to use with just the right balance of fluidity and density that ensures it is a pleasure to work and gives a perfect finish every time.
SL2K is easy to use with just the right balance of fluidity and density that ensures it is a pleasure to work and gives a perfect finish every time.
Chemical Resistance
System Build Up Specification
Surface Preparation:
The surface should be free of laitance, oil, grease and loose friable particles which may effect adhesion. Diamond grinding or vacuum assisted shot blasting are recommended on smooth surfaces.
Coating:
The concrete should be primed with EP ADDAPRIME epoxy primer. Two primer coats are recommended to prevent possible pin holing. Alternative primers are available.
Coloured Top Coat:
Apply the Addalevel SL2K in your chosen colour applied at a typical rate of 3.2kg/m2 to achieve a 2mm thickness.
Surface Preparation:
The surface should be free of laitance, oil, grease and loose friable particles which may effect adhesion. Diamond grinding or vacuum assisted shot blasting are recommended on smooth surfaces.
Coating:
The concrete should be primed with EP ADDAPRIME epoxy primer. Two primer coats are recommended to prevent possible pin holing. Alternative primers are available.
Coloured Top Coat:
Apply the Addalevel SL2K in your chosen colour applied at a typical rate of 3.2kg/m2 to achieve a 2mm thickness.
Addagrip Surface Treatments UK Limited Addagrip House, Bell Lane Industrial Estate, Uckfield,East Sussex TN22 1QL
United Kingdom
Telephone: +44 (0)1825 761333 Fax: +44 (0)1825 768566
Addagrip Surface Treatments UK Ltd is a company registered in England
Registered No. 1492055 Vat No. GB 315993925
United Kingdom
Telephone: +44 (0)1825 761333 Fax: +44 (0)1825 768566
Addagrip Surface Treatments UK Ltd is a company registered in England
Registered No. 1492055 Vat No. GB 315993925
Click here for our SL2K brochure
Click here for our Biocote brochure
SL2K can be pigmented in a colour of your choice, it has excellent wear resistance and provides a gloss surface on new or old concrete floors.
Initial cure at 20oC is 10-12 hours at a depth of 2mm, full cure is achieved in 7days.
Initial cure at 20oC is 10-12 hours at a depth of 2mm, full cure is achieved in 7days.
Addalevel SL2K provides a seamless and watertight finish with good chemical resistance to most chemicals such as alkalis, oils, fats, salt but limited resisttance to acids in high concentrations. primarily intended as a coating on concrete. The treated surface will be easier to keep clean and has reasonable wear resistance. The adhesion to concrete is excellent.
It provides a smooth, impervious, hardwearing finish, intended for use in areas where hygiene, durability and the ability to be easily cleaned is of importance. Typical areas are warehouses and process areas for both food and pharmaceutical industries, clean rooms, engineering etc..
Click on a colour to see it visualised within the image