Home » External surfacing » Addabound » Technical Information » Technical Data

  • Technical Data

    Product:  Polyurethane resin
    Density:  1.06g/cm3
    Colour:   Straw/clear
    Coverage:  Refer to mix sheets
    Application temp: +5-30 ̊C
    Note: At higher temperatures additional accelerator may not be necessary
    Curing time: Varies on accelerator addition
    Full chemical cure: 7 days @ 20°C Package: Varies Shelf life: 3 months


    Addabound resin bound surfacing is a cold applied clear Polyurethane Resin screed designed to bind natural aggregates or recycled glass which is flexible and resistant to cracking. It can be supplied in a wide range of colours allowing imaginative designs to be incorporated within the paved surface.

    Surface Preparation

    Concrete surfaces to be treated should be clean, dry and free of laitance, oil, grease and loose friable particles which could affect adhesion. Asphalt surfaces must be clean and dry, details of suggested suitable base build ups are available on request.

    A suitable edging detail should be specified using either brick, stone, concrete or steel as required to provide a high quality finish detail.


    The Addabound Resin Part ’A’ & ‘B’ is delivered in pre-weighed units to which the PU Accelerator Part ‘C’ should be added (refer to PU Accelerator guidance chart). To prevent an area being installed without accelerator a small quantity has already been added to Part ‘A’ to ensure the mixed material will cure albeit at a slower rate. The mixed resin should then be thoroughly mixed with a slow speed, high torque drill and paddle for a minimum of 45 seconds.

    The mixed Addabound resin and accelerator should then be immediately added to the pre- mixed aggregate placed in a suitable mechanical mixer. Mix for 1-2 minutes then discharge into a suitable wheelbarrow and move immediately to the point of application.

    The mixed material should then be spread evenly across the surface at the required depth using a straight bladed squeegee. The surface should then be hand trowelled or power floated to a smooth compacted finish as required.

    To improve the slip resistance on the surface fine glass grit should be applied at a rate of 50-80g per sqm

    Coverage Rates

    The coverage rates will vary depending on the chosen aggregate and required depth of the Addabound bound surfacing. The coverage rate for your chosen finish will be indicated on the ‘Mix Details’ sheet included with your order/delivery note.

    Cleaning of Tools and Hands

    Tools, brushes etc, should be cleaned immediately after use in White Spirits. Squeegees can be cleaned by putting them in a tub of hot water and then scraping away residue. A mixture of hot water and heat is used for cleaning the mixer sides and paddles.

    No naked flames should be used.

    Cleaning of hands, use Addagrip Organic Hand Cleaner.

    Health and Safety Precautions

    Before using this product, please ensure you have been supplied and have read carefully the following:-

    1. The hazard label (complying with CLP – European Regulation (EC) No. 1272/2008 on Classification, Labelling and Packaging of substances and mixtures) applied to the container.

    2. Material Safety Data Sheet

    How to Specify

    Addabound Resin is supplied by Addagrip Surface Treatments UK Limited, Addagrip House, Bell Lane Industrial Estate, Uckfield, East Sussex TN22 1QL It is to be used to............. (give details of project and thickness required). Mixing and application of the product must be carried out in accordance with the manufacturer’s instructions.

    Addagrip Surface Treatments UK Limited products are sold subject to the company's Terms and Conditions of Sale, a copy of which is available on request. Whilst Addagrip endeavours to ensure that advice, specifications, recommendations and information given is correct, it cannot have control over how its products are applied and will not accept liability, directly or indirectly, arising from application of its materials. Any advice, recommendation or information given by Addagrip Surface Treatments UK Limited is based on practical experience and is believed to be accurate at the time of publication, no liability or responsibility of any kind (including liability for negligence) is accepted in this respect by the company, its Servants, or Agents. The figures quoted do not constitute a specification. They represent typical values obtained for this product.

    Jan 2013

  • Addabound

  • Over 35 years experience in the Resin Industry


    Addagrip Terraco Ltd is a company registered in England Registered No. 1492055  VAT No. GB 315993925

  • Addagrip Terraco Ltd
    Addagrip House
    Bell Lane Industrial Estate
    East Sussex TN22 1QL

    Telephone:  01825 761333
    email:  sales@addagrip.co.uk  




  • Addaset

    Addaset provides a smooth, contemporary, hard wearing and low maintenance, surface using a range of natural and recycled aggregates. The finished surface is a seamless bound paving system which is flexible and porous and perfect for both domestic and commercial use. Addaset is BBA certified.

  • Addabound

    Addabound retains all the features of Resin Bound paving with the added benefit of a minimum recycled content of 25%. The finished surface is a seamless bound paving system which is flexible, porous & perfect for both domestic and commercial use. Addabound is BBA certified.

  • Terrabound

    Terrabound is our commercial grade Resin Bound surfacing system which provides a smooth, contemporary,  hard wearing and low maintenance surface using a range of natural aggregates. Suitable for domestic and commercial use. Terrabound is BBA certified.

  • Addastone

    The Addastone Resin Bonded Surfacing system provides an attractive, hard wearing and low maintenance surface by bonding loose aggregate to concrete, asphalt, wood or metal. Suitable for driveways, pathways, patios, car parks and access roads.

  • Addastone TP

    The Addastone Tree Pit system is designed to provide an attractive and aesthetically pleasing porous paving system for tree pits using a variety of natural or recycled aggregates in a 6-10mm stone size.

  • Addacolor

    Addacolor retains all of the benefits of our standard Resin Bound Surfacing systems and is ideally suited to those  projects that require a splash of colour inside and out.

  • Terrabase Rustic

    Terrabase Rustic is an innovative porous Resin Bound surfacing system designed to give a natural rustic appearance to paths and driveways. The patented product does not require a concrete or asphalt base making it the perfect 'no-dig' resin bound surfacing solution.

  • Terrabase Classic

    Terrabase Classic  is an innovative patented porous resin bound surfacing system using our BBA approved resin bound Addaset, Addabound and Terrabound systems to give a contemporary aggregate appearance to paths and driveways for projects where a concrete or asphalt base is not an option. 

View all External Surfacing

  • PU Floor Green Line

    PU Floor Green Line is a polyurethane resin floor with high elasticity and colour pigmentation providing a bespoke and highly versatile designer resin floor finish.  

  • Addalevel SL2K

    Addalevel SL2K is a pigmented, seamless resin flooring system based on a solvent-free epoxy resin compound intended for use on new and old concrete floors.  

  • EP Addaflor

    Addaflor resin flooring provides a tough, chemical resistant floor finish. The chemical interaction between the two component parts creates a surface that can be stronger than concrete.  

  • PU Addatex BT

    Addatex Stone Carpet is a polyurethane resin floor utilising a mix of natural and synthetic aggregates providing a highly decorative and versatile resin floor finish.  

  • PU Addazing

    Addazing incorporates metallic and/or pearlescent pigments to create a truly bespoke surfacing option. Each designer floor, each mix and every finish is as individual as the people who choose it.  

  • PU Addaflake

    PU Addaflake is a fast curing UV stable polyurethane coating, designed to be broadcast with decorative flakes and quartz. Available in s standard range or bespoke colour finish.  

  • Primers, Mortars & Cleaners

    We also supply a range of primers, cleaners, and patching materials.  

View all Internal & Industrial Flooring

  • Addagrip 1000 System

    The Addagrip 1000 System Resin has been specifically developed to treat frost damaged, spalled or smooth concrete airfield pavements, concrete roads, concrete ramps and steps. 

  • Canader Pothole Repair

    Canader is a uniquely blended, 6mm cold applied permanent filling solution for effective pothole repair.

View all Specialist Resin Treatments